Setting The Alarm Delay Duration - YOKOGAWA MuR10000 Manual

9.11 Setting the Alarm Delay Duration

Procedure
Explanation
IM 04P01B01-01E
This section explains the details of setting the duration of the delay high limit and delay
low limit alarms.
1.
Hold down the key for 3 seconds to enter Setting mode.
MENU
2.
Press the key or SHIFT +
3.
Press the key or SHIFT +
4. Press the key or SHIFT +
key.
5. Set each item and press the
Use the key or SHIFT +
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
6. When the Setting complete screen appears, do either of the following:
Press the key to set other channels.
If you are done, press the ESC key.
7.
Hold down the key for 3 seconds to return to Operation mode.
MENU
Set=Math
Math=Aux
Aux=Alm delay T
CH=0A-0A
First channel Last channel
Duration=
0A-0A Channel
Setting complete
ESC/?
Duration
The duration can be set to a value in the range of 1 to 3600 s.
However, if the scan interval on the dot model is 2.5 s, the actual duration is an integer
multiple of 2.5 s. If the set value is not equal to an integer multiple of 2.5 s, the duration is
the smallest integer multiple of 2.5 s greater than the set value.
Example: The actual duration for 1 s and 2 s is 2.5 s.
<Related Topics> Enabling the alarm delay function: Section 7.15
key to select Math and then press the
key to select Aux and then press the
key to select Alm delay T and then press the
key.
key to select values.
Set the channel range.
Set the alarm delay time.
10
The new setting takes effect.
1
2
3
key.
key.
4
5
6
7
8
9
10
11
12
App
Index
9-19