YOKOGAWA MuR10000 Manual page 241

Printouts (Pen Model)
Item
Recording pen (color)
Alarm printout
Printout contents
Time printout format
Alarm printout buffer
Periodic printout
Interval
(see appendix 2)
Mode
Printout contents
Message printout
Number of messages
Printout contents
Time printout format
Message printout buffer Stores 5 messages waiting to be printed.
Recording start printout
Printout contents
Time printout format
New chart speed printout
Printout contents
Time printout format
Manual printout
Printout contents
Setting printout (List)
Printout contents
Setting printout (Setup)
Printout contents
Items dependent on the chart speed
Date printout format
IM 04P01B01-01E
Specifications
Plotter pen (purple)
Prints alarm occurrence/release.
Occurrence ( )/release ( ) marks, channel number or tag, alarm type, alarm level, time, printout
buffer overflow mark.
Selectable from hour:minute, hour:minute:second, month:day:hour:minute,
month:day:hour:minute:second, and year:month:day:hour:minute:second.
Stores 8 occurrences of alarm information waiting to be printed.
Prints at specified time intervals from the reference time.
Reference time: 00 hour 00 minute to 23 hour 00 minute (1 hour steps, minute fixed)
Auto: Automatically determined from the chart speed.
Manual: Select 10 min, 12 min, 15 min, 20 min, 30 min, 1 hour, 2 hours, 3 hours, 4 hours,
6 hours,8 hours, 12 hours, or 24 hours.
Selectable from disable periodic printout, print instantaneous values, and print report data (report
mode).
Report data: Selectable from the average, minimum, maximum, minimum/maximum/average, sum
value, and instantaneous value.
For instantaneous values: Date/Time, offset compensation ON/OFF, channel information
(measured value, alarm status, unit, delta computation ON/OFF, scale,
channel number or tag, recording color), chart speed (with time ticks)
For report data: Report start/end date/time, offset compensation ON/OFF, events, channel
information (value, unit, range change occurrence, scale, recording color), chart
speed (with time ticks)
Prints preset message strings.
5
Time, message (up to 16 characters), printout buffer overflow mark.
Selectable from hour:minute, hour:minute:second, month:day:hour:minute,
month:day:hour:minute:second, year:month:day:hour:minute:second, and not print.
Prints at the start of recording.
Time and chart speed, printout buffer overflow mark.
Selectable from hour:minute, hour:minute:second, month:day:hour:minute,
month:day:hour:minute:second, and year:month:day:hour:minute:second.
Prints when the chart speed is changed.
Chart speed and time, printout buffer overflow mark.
Selectable from hour:minute, hour:minute:second, month:day:hour:minute,
month:day:hour:minute:second, and year:month:day:hour:minute:second.
Prints the measured values of all channels and the computed results when computation mode is
on.
Measured values of all channels at that point.
Trend recording is temporarily suspended.
Prints the settings of items in Setting mode.
Range setting, alarm setting, etc.
Trend recording is temporarily suspended.
Prints the settings of items in Basic Setting mode.
Basic alarm specifications, basic recording specifications, etc.
Trend recording is temporarily suspended.
Chart speed Periodic printout
5 to 9 mm/h
10 to 1500 mm/h
1600 mm/h or higher
Chart speed Periodic printout interval
10 to 18 mm/h
20 to 36 mm/h
40 to 72 mm/h
75 to 135 mm/h
150 to 180 mm/h
200 to 320 mm/h
350 to 1500 mm/h
Select the printout format of the date from Y/M/D, M/D/Y, D/M/Y, D.M.Y, and M.D.Y. The format
applies to the date printout of all printout items (version 1.11 and later).
12.3 Recording Function Specifications
Alarm printout
Message printout
Record start printout
New chart speed printout
Not printed Printed
Printed Printed
Not printed Not printed
8 hours
4 hours
2 hours
1 hour
30 minutes
20 minutes
10 minutes
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
12-5