Enabling The Filter Function (Pen Model) - YOKOGAWA MuR10000 Manual

7.12 Enabling the Filter Function (Pen Model)

Procedure
Explanation
7-20
This section explains details of enabling/disabling the input filter function on the pen
model.
Basic Setting mode cannot be entered when recording is in progress or when
computation is in progress on models with the computation function (/M1 option).
Changing the Settings
1. Hold down the
MENU
2.
Hold down the
Setting mode.
3.
Press the key or SHIFT +
4.
Set each item and press the
key or SHIFT +
Use the
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
5.
When the Setting complete screen appears, do either of the following:
To correct the setting, press the
If you are done, press the ESC key.
Basic=Filter
Filter=Not
Filter
ESC/?
Setting complete
Applying the Changes and Returning to Operation Mode
Press the key or SHIFT +
the key to select Store and then press the
the screen returns to Operation mode. If you select Abort and press the
changes are discarded, and the screen returns to Operation mode. Press the ESC key to
return to the Basic= screen.
Filter
Use: Enables the setting of the filter time constant in Setting mode.
Not: The Filter item does not appear in Setting mode.
<Related Topics> Setting the filter: Section 6.2
key for 3 seconds to enter Setting mode.
and keys simultaneously for 3 seconds to enter Basic
key to select Filter and then press the
key.
key to select values.
key.
Enable/Disable the filter function.
The new setting takes effect.
key to select End and then press the
key. The changes are applied, and
key.
key. Press
key, the
IM 04P01B01-01E