YOKOGAWA MuR10000 Manual page 199

9.3 Setting the Unit
Procedure
Explanation
IM 04P01B01-01E
This section explains the details of setting the unit on computation channels.
1.
Hold down the key for 3 seconds to enter Setting mode.
MENU
2.
Press the key or SHIFT +
3. Press the key or SHIFT +
4.
Set each item and press the
key or SHIFT +
Use the
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
5.
When the Setting complete screen appears, do either of the following:
Press the key to set other channels.
If you are done, press the ESC key.
6.
Hold down the key for 3 seconds to return to Operation mode.
MENU
Set=Math
Math=Unit
CH=0A-0A
First channel Last channel
Unit=
0A-0A Channel
ESC/? Setting complete
Characters That Can Be Used for Units
Set the unit using up to 6 characters.
The available characters are as follows:
Alphabet, numbers, symbols (%, #, °, @, +, –, *, /, (, ), µ, Ω,
key to select Math and then press the
key to select Unit and then press the
key.
key to select values.
Set the channel range.
Set the unit.
The new setting takes effect.
2 3
, , .), and space
1
2
3
key.
key.
4
5
6
7
8
9
10
11
12
App
Index
9-9