Setting The Alarm - YOKOGAWA MuR10000 Manual

5.2

Setting the Alarm

Procedure
IM 04P01B01-01E
The alarm is set for each channel.
If you change the input range, set the alarm again.
1.
Hold down the key for 3 seconds to enter Setting mode.
MENU
2.
Press the key or SHIFT +
key.
3.
Set each item and press the
Use the key or SHIFT +
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
4.
When the Setting complete screen appears, do either of the following:
Press the key to set other channels.
If you are done, press the ESC key.
5.
Hold down the key for 3 seconds to return to Operation mode.
MENU
Set=Alarm
CH=01-01
First channel Last channel
Level=1
Alarm=Off
Type=H
Value= 1.000
Relay=Off
Relay_No.=I01
01-01 CH/level 1
ESC/?
Setting complete
key to select Alarm and then press the
key.
key to select values.
Set the channel range.
Select the level number between 1 and 4.
Select On to set the alarm.
When set to On, the settings below can
be entered.
Select the alarm type.
Select the value used to turn On the
alarm.
Turn relay On when outputting alarms on
the relay. This setting is valid only on
models with the /A1, /A2, or /A3 option.
Specify the alarm relay No.
The new setting takes effect.
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
5-9