Setting The Key Lock Function - YOKOGAWA MuR10000 Manual

7.10 Setting the Key Lock Function

Procedure
7-16
This section explains the details of setting the keys that can be locked and the password
for releasing the key lock.
Basic Setting mode cannot be entered when recording is in progress or when
computation is in progress on models with the computation function (/M1 option).
Changing the Settings
1. Hold down the
MENU
2.
Hold down the
Setting mode.
3.
Press the key or SHIFT +
key.
4.
Set each item and press the
Use the key or SHIFT +
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
5. When the Setting complete screen appears, do either of the following:
To correct the setting, press the
If you are done, press the ESC key.
Basic=Keylock
Keylock=Use
(Displays the following when the
Keylock is set to Use)
Password=
RCD=Free
Feed=Free
Menu=Free
To the next page
key for 3 seconds to enter Setting mode.
and keys simultaneously for 3 seconds to enter Basic
key to select Keylock and then press the
key.
key to select values.
key.
Select whether to use the key lock
function.
Set the password for releasing the key
lock.
Select Lock to apply the key lock function
to the RCD key.
Select Lock to apply the key lock function
to the FEED key.
Select Lock to apply the key lock function
to the MENU key.
IM 04P01B01-01E