YOKOGAWA MuR10000 Manual page 55

Display functions
Item
Display brightness
Bar graph display mode
Display type
Date format
Other functions
Item
Key lock
Customized menu
Language
Internal light brightness
Computation function (/M1 option)
Item
Computing equation and recording span
TLOG computation
Unit
Constants
Alarms
Record by setting recording zone
Partial expanded recording Use Partial in Basic Setting mode and select Use or Not.
Change the recording color (dot model)
IM 04P01B01-01E
Description
Use Aux > Brightness > Display in Setting mode to set the display brightness.
Use Bar graph in Basic Setting mode to set the bar graph display mode.
Assigns the display type on the data display setup Screen No.
Same as the Date format in "Recording functions."
Description
• Target keys and password
Use Keylock in Basic Setting mode to set the keys to be key-locked and the
password.
• Enable the key lock
Use Func > Keylock in Operation mode and select Use or Not.
• Selecting the FUNC key display menu
Use Select menu > Function in Basic Setting mode to select the menus to be
displayed.
• Selecting the displayed menu of Setting mode
Use Select menu > Set mode in Basic Setting mode to select the menus to be
displayed.
• Executing the customize menu
Use Cust. menu in Basic Setting mode to set whether to use the customized menu.
If Use is selected, only the menus set to ON in the menu selection are displayed, and
Basic Setting mode is locked.
If Not is selected, all menus are displayed, and the Basic Setting mode lock is
released.
Use Language in Basic Setting mode to set the display and printout language.
Use Aux > Brightness > Light in Setting mode to set the internal light brightness.
Description
Use Math > Formula in Setting mode to set the computing equation and recording
span for each channel.
If TLOG computation is selected, use Math > Timer in Basic Setting mode to set the
timer operation
Use Math > TLOG > Timer No. in Setting mode to set the timer used on each
computation channel.
Use Math > Unit in Setting mode to set the unit for each channel.
Use Math > Constant in Setting mode to define constants to be used in the computing
equations.
Use Math > Alarm in Setting mode to set the alarm for each channel.
• Delay high limit alarm/delay low limit alarm
• Alarm type
Use Personalize > Add function > Alarm delay in Basic Mode and select Use or
Not (common with measurement channels).
If Use is selected, delay high limit alarm and delay low limit alarm become selectable
under Math > Alarm > Type in Setting mode. If Not is selected, alarm delay cannot
be selected.
• Alarm delay time
Use Math > Aux > Alm delay T in Setting mode to set the alarm delay time.
Use Math > Aux > Zone in Setting mode to set the recording zone for each channel.
If Use is selected, set the display mode using Math > Aux > Partial in Setting mode.
If Not is selected, the Math > Aux > Partial item does not appear.
Use Color in Basic Setting mode to set the recording color of each computation
channel.
1.10 Function Setup Guide
Reference
Section
6.11
7.9
Chapter 8
7.19
Reference
Section
7.10
3.13
7.20
7.21
7.22
7.14
6.11
Reference
Section
9.2
9.12
9.6
9.3
9.4
9.5
7.15
9.11
9.7
7.13
9.8
9.13
1-37
1
2
3
4
5
6
7
8
9
10
11
12
App
Index