Setting The Date/Time When Switching Between Standard Time And Dst - YOKOGAWA MuR10000 Manual

6.16 Setting the Date/Time When Switching between
Standard Time and DST
Procedure
6-22
This section explains the details of setting the date/time when switching from the
standard time to DST and the date/time when switching back from DST to standard time
if the recorder is used in a region that has DST. When the preset date/time arrives, the
recorder internal clock automatically switches.
1.
Hold down the
MENU
2. key or SHIFT +
Press the
3. key or SHIFT +
Press the
4.
Set each item and press the
Press the key or SHIFT +
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to then are
cancelled, and the display returns to a higher level menu.
5.
When the Setting complete screen appears, do either of the following:
Press the key to set other channels.
If you are done, press the ESC key.
6.
Hold down the
MENU
key for 3 seconds to enter Setting mode.
key to select Aux and then press the
key to select DST and then press the
key.
key to select values.
key for 3 seconds to return to Operation mode.
key.
key.
IM 04P01B01-01E