Changing The Printout/Display Format Of The Date - YOKOGAWA MuR10000 Manual

7.19 Changing the Printout/Display Format of the
Date
Procedure
Explanation
7-30
This section explains how to change the printout/display format of the year, month, and
day. This function is available on version 1.11 or later.
Basic Setting mode cannot be entered when recording is in progress or when
computation is in progress on models with the computation function (/M1 option).
Changing the Settings
1.
Hold down the
MENU
2.
Hold down the
Setting mode.
3.
Press the key or SHIFT +
key.
4.
Set each item and press the
key or SHIFT +
Use the
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
5. When the Setting complete screen appears, do either of the following:
To correct the setting, press the
If you are done, press the ESC key.
Basic=Date format
Type=M.D.Y
Date format
ESC/?
Setting complete
Applying the Changes and Returning to Operation Mode
Press the key or SHIFT +
key to select Store and then press the
the
the screen returns to Operation mode. If you select Abort and press the
changes are discarded, and the screen returns to Operation mode. Press the ESC key to
return to the Basic= screen.
Date Format
Setting Format Example
Y/M/D 2005/8/31
M/D/Y 8/31/2005
D/M/Y 31/8/2005
D.M.Y 31.8.2005
M.D.Y Aug.31.2005
key for 3 seconds to enter Setting mode.
and keys simultaneously for 3 seconds to enter Basic
key to select Date format and then press the
key.
key to select values.
key.
Select the date format.
The new setting takes effect.
key to select End and then press the
Note
Default value
key. The changes are applied, and
key. Press
key, the
IM 04P01B01-01E