YOKOGAWA MuR10000 Manual page 188

8.1 Key Operations for Changing the Displayed Information
Data Display Setup Menu
Display type
Screen
1CH digital display
2CH digital display
Screen 15 4CH digital display
6CH digital display (dot model)
1CH digital + 1CH bargraph display
1CH digital + 4CH bargraph display (pen model)
2CH digital + 2CH bargraph display
4CH bargraph display (pen model), 6CH bargraph display (dot model)
Flag display
Channel alarm status display
Time/Chart speed display
DI/DO display (when the /R1, or /A
Multiple display
(Display in which different screens can be
assigned to the top and bottom sections)
Tag_1CH digital display
Tag_2CH digital display
Tag_1CH digital + 1CH bargraph display
Tag_1CH digital + 4CH bargraph display (pen model)
Status display
System display
SD memory card status display (when the /EM1 option is installed)
Batch name display (when the /BT1 option is installed)
Lights out
8-2
This menu is used to assign display types to screen 01 to 15. The
display type. The items to set for each type are shown to the right of the display type.
Display update rate
Display update rate
Display update rate
On/Off for each channel
Top section
End
End
End
Skip End
The display update rate corresponds to "Interval" in the setup menu. It is the time interval at
which the displayed channel is switched.
End
End
End
Display update rate
Display update rate
Display update rate
Display update rate
End
End
option is installed)
Channel number
Channel number
Display update rate
End
Display update rate
End
Display update rate
indicates a
End
End
End
End
End
End
Display update rate Bottom section
Display update rate
Tag display type
End
Display update rate End
End
End
End
IM 04P01B01-01E