Specifying A Range - YOKOGAWA GX10 User Manual

Type Notation and Range of Values
Number of GX10/GP10: 10
channels GX20/GP20: 20
that can be
registered to
GM10: 20
display groups
Modbus server GX10/GP10/GX20-1/GP20-1: 1 to 16
setting number GX20-2/GP20-2: 1 to 32
GM10-1: 1 to 16
GM10-2: 1 to 32
Modbus GX10/GP10: 1 to 50
command GX20-1/GP20-1: 1 to 100
number GX20-2/GP20-2: 1 to 200
GM10-1: 1 to 100
(Ethernet)
GM10-2: 1 to 200
Modbus GX10/GP10: 1 to 50
command GX20/GP20: 1 to 100
GM10: 1 to 100
number (serial
communication)
Server setting GX10/GP10: 1 to 8
number for WT GX20/GP20: 1 to 16
communication GM10: 1 to 16
Communication GX10/GP10: 1 to 50
channel GX20/GP20: 1 to 300
GM10: 1 to 300
allocation
number for WT
communication
Number of users Advanced security function (/AS) not
that can be installed or disabled: 1 to 50
registered (user Advanced security function (/AS)
enabled: 1 to 100
number)
Number of batch GX10/GP10: 2 to 6
groups in use for GX20-1/GP20-1: 2 to 6
the multi batch GX20-2/GP20-2: 2 to 12
function (/BT) GM10-1: 2 to 6
GM10-2: 2 to 12
Batch group 1 to (number of batch groups in use)
number when
the multi batch
function is
enabled
Number of GX10/GP10: 1 to 6
display groups GX20-1/GP20-1: 1 to 6
when the multi GX20-2/GP20-2: 1 to 12
batch function (/ GM10-1: 1 to 6
BT) is enabled GM10-2: 1 to 12
Schedule GX10/GP10: 1 to 6
registration GX20-1/GX20-1: 1 to 6
number GX20-2/GP20-2: 1 to 12
GM10-1: 1 to 6
GM10-2: 1 to 12
Number of GX10-1/GX20-1/GM10-1: 1 to 5
control groups GX20-2/GM10-2: 1 to 10
Loop number L001 to L652
To specify the loop number, add
an "L" in front, and specify as "unit
number+module number+loop number."
The loop number is 1 or 2.
Example The loop whose unit number
is 0, module number is 0, and loop
number is 1 is L001.
IM 04L51B01-17EN
Type Notation and Range of Values
PID module The terminal numbers in a PID module
terminal number consists of AI, AO, DI, and DO.
AI: 1 or 2, AO: 1 or 2, DI: 1 to 8, DO: 1
to 8
Logic math GX10: 1 to 20
number GX20-1/GX20-2, GM10-1/GM10-2: 1
to 50
2.3.3

Specifying a Range

When specifying consecutive channel numbers or group
numbers in a setting command, you can specify them
using a range instead of specifying each number one by
one.
• Use a hyphen to separate the first number and the last
number. For I/O channels, you can specify a range that
spans over multiple slots that modules are installed in.
• You can specify the minimum number by omitting the
number before the hyphen and the maximum number
by omitting the number after the hyphen. If you want
to specify all numbers from the first number to the last
number, specify only the hyphen.
Example 1
To specify 3 to 10: "3-10"
To specify 3 to the maximum number: "3-"
To specify the first number to 10: "-10"
To specify all numbers: "-"
Example 2
A command that sets the channel ranges of AI modules
installed in slots 0 to 2 to Skip.
SRangeAI,0001-0210,Skip or
SRangeAI,-0210,Skip
If a different module is installed in slot 1, queries will work,
but setting commands will result in error.
2.3 Parameters
1
2
App
2-13