Panasonic MINAS A5 Series Operating Instructions Manual page 94

2
Preparation
H-frame, 400 V type
Never touch the terminal to which high voltage is applied. There is a risk of electric shock.
Tips on Wiring
2)Make wiring
Use clamp type terminals of round shape with insulation cover for wiring to the terminal
block. For cable diameter and size, reter to "Driver and List of Applicable Peripheral
Equipments" (P.2-11).
Tighten the terminal block screw with a torque between 0.7 and 1.0
and 2.2 and 2.5
Tighten the screw securing the cover with the torque written on P.2-11.
Power
MCCB
supply
DC
24V
Motor
DC
Varistor
Note The wiring indicated with the broken line shall be provided only when required.
Related page
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
2-46
2.
Wiring of the Main Circuit (H-frame, 400 V type)
m (lower side).
Upper
DC
24V
24V
0V
L1 DB1
MC L
L2 DB2
L3
B1
B2
NC
U
U
V
V
W
W
Lower
E
DC power
supply
24V
Never start/stop the motor with this Magnetic
Contactor.
Avoid shorting and grounding.
Don't connect the main power.
Earth-ground this.
Don't connect the earth cable to other inserting
slot, nor make them touch.
m (upper side)