Panasonic MINAS A5 Series Operating Instructions Manual page 42

5. Installation
Driver
Be sure to conduct wiring properly and securely. Insecure or improper wiring may cause the mo-
tor running out of control or being damaged from overheating. In addition, pay attention not to al-
low conductive materials, such as wire chips, entering the driver during the installation and wiring.
cation.
standards and the operating instruction manual or technical documents for the product.
applied because they may become failure or malfunction.
dynamic brake circuit in the driver.
tion. Using the driver in a sealed control box may cause an abnormal heating of the control
box. A proper consideration should be given to cool the driver so that the ambient temperature
in the motor itself or the driver coupled with it. A proper consideration should be given if the mo-
tor is used in a clean room or similar environment.
dwell period.
Restarting the motor earlier may cause a broken wire in the dynamic brake making the brake in-
operable.
age.
To prevent a secondary accident due to malfunction, it should be replaced with new one after
5-year use.
Replacement should be performed by us or our authorized distributor.
Recommended Electric Wires for Driver
determined according to the reduction rate must be subtracted from the nominal allow-
able current.
<In high ambient temperature>
Use heat resistant wire.
Common polyvinyl chloride wires will deteriorate by heat at a higher rate.
<In low ambient temperature>
The surface of vinyl chloride insulation becomes hardened and brittle at low tempera-
such application.
Related page
1-30
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
-
-
-