Panasonic MINAS A5 Series Operating Instructions Manual page 54

2
Preparation
Power Supply
100V type :
(A to C-frame)
200V type :
(A to D-frame)
200V type :
(E to H-frame)
400V type : Main power supply
(D to H-frame)
(1) This product is designed to be used in over-voltage category (installation category) III
of EN 61800-5-1:2007.
(2) Use an insulated power supply of DC12 to 24V which has CE marking or complies
with EN60950.
Use sheathed (jacketed) cable, twisted cable or closely bundled cable for power cable.
Remarks
Twisted
Circuit Breaker
Install a circuit breaker which complies with IEC Standards and UL recognized (Listed
and
The short-circuit protection circuit on the product is not for protection of branch circuit.
The branch circuit should be protected in accordance with NEC and the applicable local
regulations in your area.
For driver and applicable peripheral equipments, refer to P.2-10 "Driver and List of Applicable
Note
Peripheral Equipments".
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
2-6
1. Conformance to international standards
Single phase, 100V
Single/3-phase, 200V
: Control power supply
Servo driver
L1C
L2C
+10%
–15%
+10%
–15%
+10%
3-phase, 200V
–15%
+10%
3-phase, 380V
–15%
DC 24V ± 15%
Closely bundled cable
United
+10%
to 120V 50/60Hz
–15%
+10%
to 240V 50/60Hz
–15%
+10%
to 230V 50/60Hz
–15%
+10%
to 480V 50/60Hz
–15%
Servo driver
L1
L2
L3