Panasonic MINAS A5 Series Operating Instructions Manual page 70

2
Preparation
F-frame, 200 V type
Never touch the terminal to which high voltage is applied. There is a risk of electric shock.
Tips on Wiring
2) Make wiring
Use clamp type terminals of round shape with insulation cover for wiring to the termi-
nal block. For cable diameter and size, reter to "Driver and List of Applicable Periph-
eral Equipments" (P.2-10).
Tighten the terminal block screw with a torque between 1.0 and 1.7 N
Tighten the screw securing the cover with a torque written on P.2-11.
MCCB
Motor
Varistor
Note The wiring indicated with the broken line shall be provided only when required.
Related page
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
2-22
2.
Wiring of the Main Circuit (F-frame, 200 V type)
L1
MC L
L2
L3
L1C
L2C
B1
B3
B2
NC
U
U
V
V
W
W
E
DC
24V
start/stop the motor with this Magnetic Contactor.
Avoid shorting and grounding.
Don't connect the main power.
Earth-ground this.
Don't connect the earth cable to other inserting slot,
nor make them touch.
Never