Panasonic MINAS A5 Series Operating Instructions Manual page 74

2
Preparation
G-frame, 200 V type
Never touch the terminal to which high voltage is applied. There is a risk of electric shock.
Tips on Wiring
2)Make wiring
Use clamp type terminals of round shape with insulation cover for wiring to the terminal
block. For cable diameter and size, reter to "Driver and List of Applicable Peripheral
Equipments" (P.2-11).
Tighten the terminal block screw with a torque between 2.0 and 2.4
1.0 and 1.7
Tighten the screw securing the cover with the torque written on P.2-11.
MCCB
Motor
DC
Varistor
Note The wiring indicated with the broken line shall be provided only when required.
Related page
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
2-26
2.
Wiring of the Main Circuit (G-frame, 200 V type)
m (right side).
NC
L1C
L2C
L1 NC
MC L
L2 NC
DB1
L3
DB2
B1
B2 NC
NC NC
U
U DB3
V
DB4
V
W
NC
W
E
24V
start/stop the motor with this Magnetic Contactor.
Avoid shorting and grounding.
Don't connect the main power.
Earth-ground this.
Don't connect the earth cable to other inserting slot,
nor make them touch.
* Do not connect anything to NC.
m (left side) and
Never