Panasonic MINAS A5 Series Operating Instructions Manual page 86

2
Preparation
F-frame, 400 V type
Never touch the terminal to which high voltage is applied. There is a risk of electric shock.
Tips on Wiring
2) Make wiring
Use clamp type terminals of round shape with insulation cover for wiring to the terminal
block. For cable diameter and size, reter to "Driver and List of Applicable Peripheral
Equipments" (P.2-10).
Tighten the terminal block screw with a torque written on P.2-11.
Tighten the screw securing the cover with a torque written on P.2-11.
DC
24V
MCCB
Motor
DC
Varistor
Note The wiring indicated with the broken line shall be provided only when required.
Related page
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
2-38
2.
Wiring of the Main Circuit (F-frame, 400 V type)
24V
0V
L1
MC L
L2
L3
B1
B3
B2
NC
U
U
V
V
W
W
E
24V
start/stop the motor with this Magnetic Contactor.
Avoid shorting and grounding.
Don't connect the main power.
Earth-ground this.
Don't connect the earth cable to other inserting slot, nor
make them touch.
Never