Table of Contents
Advertisement
Parameters
7.2 Parameter list
Note
The Command Data Set selected using the binector inputs is displayed in r0836.
The currently effective command data set is displayed in r0050.
A Command Data Set can be copied using p0809.
p0811
BI: Command data set selection CDS bit 1 / CDS select., bit 1
Access level: 2
Can be changed: T
Unit group: -
Min:
-
Description:
Sets the signal source to select the Command Data Set bit 1 (CDS bit 1).
Dependency:
See also: r0050, p0810, r0836
Note
The Command Data Set selected using the binector inputs is displayed in r0836.
The currently effective command data set is displayed in r0050.
A Command Data Set can be copied using p0809.
p0819[0...2]
Copy Drive Data Set DDS / Copy DDS
Access level: 2
Can be changed: C2(15)
Unit group: -
Min:
0
Description:
Copies one Drive Data Set (DDS) into another.
Index:
[0] = Source Drive Data Set
[1] = Target Drive Data Set
[2] = Start copying procedure
Dependency:
See also: r3996
NOTICE
When the drive data sets are copied, short-term communication interruptions may occur.
Note
Procedure:
1. In Index 0, enter which drive data set is to be copied.
2. In index 1, enter the drive data set data that is to be copied into.
3. Start copying: set index 2 from 0 to 1.
p0819[2] is automatically set to 0 when copying is completed.
p0820[0...n]
BI: Drive Data Set selection DDS bit 0 / DDS select., bit 0
Access level: 3
Can be changed: T
Unit group: -
Min:
-
Description:
Sets the signal source to select the Drive Data Set, bit 0 (DDS, bit 0).
Dependency:
See also: r0051, p0826, r0837
NOTICE
The parameter may be protected as a result of p0922 or p2079 and cannot be changed.
584
Calculated: -
Scaling: -
Unit selection: -
Max:
-
Calculated: -
Scaling: -
Unit selection: -
Max:
3
Calculated: -
Scaling: -
Unit selection: -
Max:
-
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
Data type: Unsigned32 / Binary
Dynamic index: -
Function diagram: 8560
Factory setting:
0
Data type: Unsigned8
Dynamic index: -
Function diagram: 8565
Factory setting:
0
Data type: Unsigned32 / Binary
Dynamic index: CDS, p0170
Function diagram: 8565
Factory setting:
0
SINAMICS G120X converter
Advertisement
Table of Contents
