Chrysler 2005 Crossfire SRT6 Service Manual page 12

0 - 2 LUBRICATION & MAINTENANCE
PARTS & LUBRICANT RECOMMENDATION
STANDARD PROCEDURE - PARTS AND LUBRICANT RECOMMENDATIONS
Lubricating grease is rated for quality and usage by
the NLGI. All approved products have the NLGI sym-
bol on the label. At the bottom NLGI symbol is the
usage and quality identification letters. Wheel bearing
lubricant is identified by the letter "G". Chassis lubri-
cant is identified by the latter "L". The letter following
the usage letter indicates the quality of the lubricant.
The associated symbols indicate the highest quality.
When service is required, DaimlerChrysler Corporation
recommends that only Mopar brand parts, lubricants
and chemicals be used. Mopar provides the best engi-
neered products for servicing DaimlerChrysler Corpo-
ration vehicles.
FLUID TYPES
DESCRIPTION
DESCRIPTION - ENGINE OIL AND LUBRICANTS
WARNING: NEW OR USED ENGINE OIL CAN BE IRRITATING TO THE SKIN. AVOID PROLONGED OR
REPEATED SKIN CONTACT WITH ENGINE OIL. CONTAMINANTS IN USED ENGINE OIL, CAUSED BY INTER-
NAL COMBUSTION, CAN BE HAZARDOUS TO YOUR HEALTH. THOROUGHLY WASH EXPOSED SKIN WITH
SOAP AND WATER. DO NOT WASH SKIN WITH GASOLINE, DIESEL FUEL, THINNER, OR SOLVENTS,
HEALTH PROBLEMS CAN RESULT. DO NOT POLLUTE, DISPOSE OF USED ENGINE OIL PROPERLY. CON-
TACT YOUR DEALER OR GOVERNMENT AGENCY FOR LOCATION OF COLLECTION CENTER IN YOUR
AREA.
When service is required, DaimlerChrysler Corporation recommends that only Mopar brand parts, lubricants and
chemicals be used. Mopar provides the best engineered products for servicing DaimlerChrysler Corporation vehi-
cles.
Only lubricants bearing designations defined by the following organization should be used.
• Society of Automotive Engineers (SAE)
• American Petroleum Institute (API)
• National Lubricating Grease Institute (NLGI)
ZH