Dell Z9500 Command Reference Manual page 1847

Command CONFIGURATION-VRF
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OSCommand Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.4(0.0)
Usage
If the maximum route limit is not specified for a VRF, then it has unlimited space
Information
that extends to the maximum number of entries allowed for the system. This
command is not applicable to the default and management VRFs.
show ip vrf
Displays information corresponding to the VRFs that are configured in the system.
Z9500
Syntax
show ip [vrf vrf-name]
Parameters
vrf vrf-name
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.5(0.0)
Version 9.4.
(0.0)
Version 8.2.1.0
Example
show ip vrf
VRF-Name
default
Virtual Routing and Forwarding (VRF)
Description
Introduced on the S6000-ON and Z9500.
Introduced on the S–Series.
Enter the keyword vrf and then the name of the VRF to
display information corresponding to that VRF..
Introduced on the Z9500.
Introduced on the S-Series and Z9000.
Introduced on the E-Series.
VRF-ID Interfaces
0 Te 0/0-13,18-47,
Fo 0/48,52,56,60,
1847