Checking The Gear Shift And Throttle Operation - SELVA MARINE Wahoo 15 Service Manual

GEN
INFO
3. Check that the shift rod lever joint 5 is in
the neutral position as shown. Connect
the shift cable 6 to the shift rod lever
joint 5 and install the clip 7.
N
7 6
5
F R
7
WARNING
The shift/throttle cable joint must be
screwed in a minimum of 8.0 mm (0.31 in)
b.
Checking the gear shift and throttle
operation
1. Check that the throttle operates smoothly
when the throttle grip is turned from the
fully closed position to the fully open
position a. (Tiller handle model)
Check that the throttle operates smoothly
when the remote control lever is shifted
from forward or reverse to the fully open
position a. (Remote control model)
2. Check that the gear shift operates
smoothly when the shift lever or remote
control lever is shifted from the neutral
position to forward or reverse.
1-15
General information
5
6
S6AG1080
b
S6AG1090
È
R
É
a
È Tiller handle model
É Remote control model
NOTE:
• The shift lever cannot be operated unless
the throttle grip is in the fully closed posi-
tion. (Tiller handle model)
• The resistance of the throttle grip (tiller han-
dle model) or remote control lever (remote
control model) can be adjusted using the
throttle friction adjuster 1.
3. Check that the shift lever cannot be set to
1
the forward or reverse position when the
grip is not in the fully closed position.
(Tiller handle model)
R
N
F
1
N
R
F
N
F
a
S6AG1120
a
1
S6AG1280
S6AG1125
6AG3J11