Dvmrp Configuration Commands - Accton Technology ES4710BD User Manual

ip dvmrp report-interval <time_val>
no ip dvmrp report-interval
d. Configuring DVMRP route timeout time
Command
Global Mode
ip dvmrp route-timeout <time_val>
no ip dvmrp route-timeout
4. Configure DVMRP tunneling
Command
Interface Mode
ip dvmrp tunnel <A.B.C.D> [metric
<metric_val>]
no ip dvmrp tunnel <A.B.C.D>
5. Disable DVMRP
Command
Interface Mode
no ip dvmrp enable

19.5.2.2 DVMRP Configuration Commands

ip dvmrp cisco-compatible
ip dvmrp enable
ip dvmrp graft-interval
ip dvmrp metric
ip dvmrp nbr-timeout
ip dvmrp probe-interval
ip dvmrp report-interval
ip dvmrp route-timeout
ip dvmrp tunnel
show ip dvmrp mroute
show ip dvmrp neighbor
show ip dvmrp route
show ip dvmrp tunnel
debug ip dvmrp detail
debug ip dvmrp pruning
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
Sets the interval for sending DVMRP report
messages; the "no ip dvmrp report interval"
command restores the default setting.
Explanation
Sets timeout interval for DVMRP routes; the "no
ip dvmrp route-timeout" command restores the
default setting.
Explanation
Configures tunneling to neighbor A, B, C, D; the
"no ip dvmrp tunnel" command removes the
tunnel to neighbor A, B, C, D.
Explanation
Disables DVMRP
482