Clear Port-Security Dynamic; Switchport Port-Security Maximum - Accton Technology ES4710BD User Manual

EES4710BD 10 Slots L2/L3/L4 Chassis Switch
address can be added.
Example: Adding MAC 00-03-0F-FE-2E-D3 to port1.
Switch(Config)#interface Ethernet 1/1
Switch(Config-Ethernet1/1)#switchport port-security mac-address 00-03-0F-FE-2E-D3

8.5.1.2.2.6 clear port-security dynamic

Command: clear port-security dynamic [address <mac-addr> | interface <interface-id> ]
Function: Clears the Dynamic MAC addresses of the specified port.
Command mode: Admin Mode
Parameters: <mac-addr> stands MAC address; <interface-id> for specified port number.
Usage Guide: The secure port must be locked before dynamic MAC clearing operation can be
performed in a specified port. If no ports and MAC are specified, then all dynamic MAC addresses
in all locked secure ports will be cleared; if only a port but no MAC address is specified, then all
MAC addresses in the specified port will be cleared.
Example: Deleting all dynamic MAC addresses in port1.
Switch#clear port-security dynamic interface Ethernet 1/1

8.5.1.2.2.7 switchport port-security maximum

Command: switchport port-security maximum <value>
no switchport port-security maximum
Function: Sets the maximum number of secure MAC addresses for a port; the "no switchport
port-security maximum" command restores the maximum secure address number to 1.
Command mode: Interface Mode
Parameters: < value> is the maximum for static secure MAC addresses, the valid range is 1 to 128.
Default: The default number of maximum port secure MAC addresses is 1.
Usage Guide: The MAC address binding function must be enabled before the maximum number of
secure MAC addresses can be set. If the secure static MAC address number of the port is larger than
the maximum secure MAC address number set, the setting fails; extra secure static MAC addresses
must be deleted, so that the secure static MAC address number is no larger than the maximum
secure MAC address number for the setting to be successful.
Example: Setting the maximum secure MAC address number for port 1 to 4.
Switch(Config)#interface Ethernet 1/1
Switch(Config-Ethernet1/1)#switchport port-security maximum 4
191