Table of Contents
Advertisement
192.2.1.1
Vlan2
192.4.1.4
Vlan4
192.4.1.3
Vlan4
Switch #
Displayed information
Neighbor-Address
Interface
ifIndex
Uptime
Expires
DR-state
19.4.4.1.5
show ip pim rp
Command: show ip pim rp [mapping | group-address]
Function: Displays PIM RP related information
Parameters: mapping displays the group address and RP association.
group-address is the group address.
Default: No display by default.
Command mode: Admin Mode
Function: Displaying the RP information for PIM area 226.1.1.1.
Switch #show ip pim rp 226.1.1.1
RP Address for this group is: 192.2.1.1
Displayed information
RP Address
19.4.4.1.6
debug ip pim
Command: debug ip pim
Function: Enables the debugging function for displaying detailed PIM information; the "no" format
of this command disables this debug function.
Parameters: N/A.
Default: Disabled.
Command mode: Admin Mode
Usage Guide: If detailed information about PIM packets etc. is required, this debugging command
can be used.
Example:
Switch # debug ip pim
PIM debug is on
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
31
00:11:39 00:01:16 /
33
00:11:39 00:01:44 DR
33
00:11:39 00:01:17 /
Explanation
Neighbor address
The neighbor interface discovered
Interface index number
The up time of the neighbor since discovery
The remaining time before considering the
neighbor to be invalid
Whether the neighbor is a DR
Explanation
RP address of the group
477
Advertisement
Table of Contents
Troubleshooting
