Accton Technology ES4710BD User Manual page 404

Automatic network summarization is not in
effect
default metric for redistribute is :16
neigbour is
preference is :100
（2）show ip route
The "show ip route" command can be used to display the information about RIP routes in the route
table: destination IP addresses, network masks, next hop IP addresses, and forwarding interfaces,
etc.
For example, displayed information can be:
Switch#show ip route
Total route items is 2, the matched route items is 2
Codes: C - connected, S - static, R - RIP derived, O - OSPF derived
A - OSPF ASE, B - BGP derived, D - DVMRP derived
Destination Mask
C 2.2.2.0 255.255.255.0
R 7.7.7.0 255.255.255.0
R stands for RIP route, i.e., the RIP route with the destination network address of 7.7.7.0, network
mask of 255.255.255.0, the next hop address of 2.2.2.8 and the forwarding interface of Ethernet
vlan2. The priority value of this route is 100.
（3）show ip protocols
"show ip protocols" command can be used to display the information of the routing protocols
running in the switch.
For example, displayed information can be:
Switch#sh ip protocols
RIP information:
Automatic network summarization is not in effect.
default metric for redistribute is :16
neigbour is:NULL
preference is :100
RIP version information is:
interface send version
vlan1 V2BC
vlan2 V2BC
vlan3 V2BC
Switch#
Displayed information
Automatic network summarization is not in
effect
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
Disable RIP auto aggregation
The default metric for introduced route is 16.
The specified destination address.
RIP routing priority is 100.
Nexthop Interface
0.0.0.0 vlan1
2.2.2.8 vlan2
receive version
V12
V12
V12
Explanation
Disables RIP auto-aggregation
403
Pref
0
100