Table of Contents
Advertisement
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
to configure the preemptive mode for virtual router number 1 to "True".
21.4.6 Configure VRRP priority
Click "VRRP control" to configure VRRP and enter "VRRP Priority".
Example: Enter the created Virtual Router number "1" and priority. Click Enable to set the priority
of virtual router number 1 to "255". Click Disable to disable the priority of Virtual Router number 1.
21.4.7 Configure VRRP Timer interval
Click "VRRP control" to configure VRRP and enter "VRRP Interval".
Example: Enter created Virtual Router number "1" and interval "3". Click Enable to set the interval
of virtual router number 1 to "3". Click Disable to disable the interval of Virtual Router number 1.
21.4.8 Configure VRRP Interface Monitor
Click "VRRP control" to configure VRRP and enter "VRRP Circuit".
Example: Enter "1" for the created Virtual Router number, 23 for monitor port name and 100 for
priority decreasing amount. Click Enable to activate monitor on Virtual Router number 1 port 23.
Click Disable to deactivate monitor on Virtual Router number 1 port 23.
21.4.9 Configure Authentication Mode For VRRP
Click "VRRP control" to enter "VRRP AuthenMode" and configure VRRP authentication mode.
545
Advertisement
Table of Contents
Troubleshooting
