Table of Contents
Advertisement
1.4.2.4.5
Front Panel – SWAP Button
The EM4700BD-2XG-XENPAK provides a SWAP button for hot swapping the module during
operation. Before removing the modules, users should first press the SWAP button. The module will
then prepare for a hot-swap and the system operation indicator (RUN) will turn yellow and blink at
8 Hz. When the RUN indicator is off, the cards are powered off and can be removed.
1.4.2.5
EM-7600-ES and EM-7600-ES-2GB
Enhanced processing card (EM-7600-ES): enables enhanced services including IPv6, MPLS and
firewall.
Enhanced processing card with dual fiber Gb ports (EM-7600-ES-2GB): enables enhanced services
including IPv6, MPLS and firewall with 2 SFP 1000 Mb fiber ports.
1.4.2.5.1
Front Panel
The Front Panel view of the EM-7600-ES is shown below
The EM-7600-ES-2GB provides 2 SFP Gigabyte fiber transceiver ports, the front panel view is
shown below:
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
Fig 1-4
EM-7608-ES Front Panel view
Fig 1-5 EM-7600-ES-2GB Front Panel view
46
Advertisement
Table of Contents
Troubleshooting
