Address Pool Configuration - Accton Technology ES4710BD User Manual

14.6.2.1 Address pool configuration

Click "DHCP configuration", "DHCP server configuration", "Address pool configuration" to
configure the DHCP address pool function:
DHCP pool name (1-32 characters) – defines a DHCP address pool in global mode. Same as
CLI command 14.2.2.11
DHCP pool domain name (1-255 characters) – to configure DHCP client domain name. Same
as CLI command 14.2.2.6
Address range for allocating – Configures a specific address range for the address pool. Same
as CLI command 14.2.2.16
DHCP client node type – Configures the DHCP client node type: broadcast node is broadcast
type；Hybrid node is first peer-to-peer then broadcast mixed type；Mixed node is first
broadcast then peer-to-peer；Peer-to-peer node is peer-to-peer type. Same as CLI command
14.2.2.15
Address lease timeout – Configures the address lease timeout in address pool, where "0"
means everlasting use. Same as CLI command 14.2.2.13
Example: Configure DHCP pool name as 1, DHCP pool domain name as www.edge-core.com, the
Address range for allocating IP addresses as10.1.128.0, Network mask as 255.255.255.0, DHCP
client node type as broadcast node, Address lease timeout as 3 days 12 hours 30 minute ,and lastly,
click the Apply button to apply the configuration to the switch.
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
318