Accton Technology ES4710BD User Manual page 281

There are several sub-sections in this category：
ACL number (100-199)
Rule － permit or deny
Source address type － Specified IP address or any randomly allocated IP address
Source IP address
Reverse network mask
Target address type － Specified IP address or any randomly allocated IP address
Destination IP address
Reverse network mask
IP precedence
TOS
Regarding "ICMP numeric extended ACL", there are two sub-categories:
ICMP type
ICMP code
Regarding "IGMP numeric extended ACL", there is one sub-category:
IGMP type
Regarding "TCP numeric extended ACL", there are three sub-categories:
Source port
Target port
TCP sign
Regarding "UDP numeric extended ACL", there are two sub-categories:
Source port
Target port
Regarding "numeric extended ACL for other protocols", there is one sub-category: Matched
protocol.
Matched protocol － includes IP, EIGRP, OSPF, IPINIP and Input Protocol manually. If user
selects to input manually, they can just simply key-in the protocol number in the right hand
side of icon.
Example: a user wants to configure the " Add TCP numeric extended ACL" with the ACL number
of 110, deny the source IP address of 10.0.0.0/24 section, and make the target port is 21. Please refer
the following configurations and then click the icon of "Add".
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
280