default metric 16
neighbour is
preference is 100
Displayed information
rip is turning on
default metric 16
neighbour is
preference is 100
18.3.2.2.22 debug ip rip packet
Command: debug ip rip packet
no debug ip rip packet
Function: Enables the RIP packet debugging function for sending/receiving: the "no debug IP
packet" command disables this debugging function.
Default: Debugging is disabled by default.
Command mode: Admin Mode
Example:
Switch#debug ip rip pa
"debug ip rip pa" executed successfully.
00:04:20:
start at 260*********************
send packets to
packet header: cmd: response, version: 1
no.
dest
1:
159.226.0.0
00:04:20:
start at 260*********************
send packets to 159.226.255.255
packet header: cmd: response, version: 1
no.
dest
1:
159.222.0.0
2:
11.11.11.2
00:04:20:
start at 260*********************
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
11.11.11.2
dest_mask
0.0.0.0
dest_mask
0.0.0.0
0.0.0.0
Explanation
RIP routing is enabled
The default metric for introduced route is 16
The specified destination address
RIP routing priority is 100
gatedway metric
0.0.0.0
1
gatedway metric
0.0.0.0
2
0.0.0.0
398
2