Show Mls Qos Interface - Accton Technology ES4710BD User Manual

Command mode: Admin Mode
Usage Guide:
Example:
Switch #show mls qos aggregate-policer policer1
aggregate-policer policer1 80000 80 exceed-action drop
Not used by any policy map
Displayed information
aggregate-policer
exceed-action drop
Not used by any policy map
16.4.1.3

show mls qos interface

Command: show mls qos interface [<interface-id>] [buffers | policers | queueing | statistics]
Function: Displays QoS configuration information on a port.
Parameters: <interface-id> is the port ID; buffers is the queue buffer setting on the port; policers
is the policy setting on the port; queuing is the queue setting for the port; statistics is
the number of packets allowed to pass for in-profile and out-of-profile traffic according
to the policy bound to the port.
Default: N/A.
Command mode: Admin Mode
Usage Guide: Statistics are available only when ingress policy is configured.
Example:
Switch #show mls qos interface ethernet 1/2
Ethernet1/2
default cos:0
DSCP Mutation Map: Default DSCP Mutation Map
Attached policy-map for Ingress: p1
Displayed information
Ethernet1/2
default cos:0
DSCP Mutation Map: Default DSCP Mutation Map
Attached policy-map for Ingress: p1
Switch # show mls qos interface buffers ethernet 1/2
Ethernet1/2
packet number of 8 queue:
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
policer1 80000
352
Explanation
80 Configuration for this policy set.
Time that the policy set is being
referred to
Explanation
Port name
Default CoS value of the port.
Port DSCP map name
Policy name bound to port.