Dhcp Server Configuration Commands; Bootfile; Client-Identifier - Accton Technology ES4710BD User Manual

client-identifier <unique-identifier>
no client-identifier
client-name <name>
no client-name
3. Enable logging for address conflicts
Command
Global Mode
ip dhcp conflict logging
no ip dhcp conflict logging
Admin Mode
clear ip dhcp conflict <address | all>

14.2.2 DHCP Server Configuration Commands

14.2.2.1

bootfile

Command: bootfile <filename>
no bootfile
Function: Sets the file name for DHCP client to import on bootup; the "no bootfile " command
deletes this setting.
Parameters: <filename> is the name of the file to be imported, up to 255 characters are allowed.
Command Mode: DHCP Address Pool Mode
Usage Guide: Specify the name of the file to be imported for the client. This is usually used for
diskless workstations that need to download a configuration file from the server on bootup. This
command is together with the "next sever".
Example: The path and filename for the file to be imported is "c:\temp\nos.img"
Switch(dhcp-1-config)#bootfile c:\temp\nos.img
Related command: next-server
14.2.2.2

client-identifier

Command: client-identifier <unique-identifier>
no client-identifier
Function: Specifies the unique ID of the user when binding an address manually; the "no
client-identifier" command deletes the identifier.
Parameters: <unique-identifier> is the user identifier, in dotted Hex format.
Command Mode: DHCP Address Pool Mode
Usage Guide: This command is used with "host" when binding an address manually. If the
requesting client identifier matches the specified identifier, DHCP server assigns the
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
Specifies the unique ID of the user when
binding an address manually
Configures a client name when binding an
address manually
Explanation
Enables logging for DHCP address to detect
address conflicts
Deletes a single address conflict record or all
conflict records
300