Debug Aaa - Accton Technology ES4710BD User Manual

Supplicant
Authenticator State Machine
State
Backend State Machine
State
Reauthentication State Machine
State
Displayed information
Global 802.1x Parameters
reauth-enabled
reauth-period
quiet-period
tx-period
max-req
authenticator mode
Mac Filter
MacAccessList
dot1x-EAPoR
802.1x is enabled on ethernet 1
Authentication Method:
Status
Port-control
Supplicant
Authenticator State Machine
Backend State Machine
Reauthentication State Machine
20.4.1.6

debug aaa

Command: debug aaa
no debug aaa
Function: Enables AAA debugging information; the " no debug aaa" command disables the AAA
debugging information.
Command mode: Admin Mode
Parameters: N/A.
Usage Guide: Enabling AAA debugging information allows the check of RADIUS negotiation
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
00-03-0F-FE-2E-D3
Authenticated
Idle
Stop
Explanation
Global 802.1x parameter information
Whether re-authentication is enabled or not
Re-authentication interval
Silent interval
EAP retransmission interval
EAP packet retransmission interval
Switch authentication mode
Enables dot1x address filter or not
Dot1x address filter table
Authentication method used by the switch (EAP relay, EAP
local end)
Indicates whether dot1x is enabled for the port
Port authentication method (MAC-based, port-based)
Port authentication status
Port authorization status
Authenticator MAC address
Authenticator state machine status
Backend state machine status
Re-authentication state machine status
526