Interface; Enable - Accton Technology ES4710BD User Manual

Commands: virtual-ip <A.B.C.D> {master| backup}
no virtual-ip
Function: Configures the VRRP dummy IP address
Parameters: <A.B.C.D> is the IP address in decimal format.
Default: Not configured by default.
Command mode: VRRP protocol configuration mode
Usage Guide: This command adds a dummy IP address to an existing Standby cluster. The "no
virtual-ip" command removes the dummy IP address from the specified Standby cluster. Each
Standby cluster can have only one dummy IP, and each dummy IP has two properties: master and
backup. When specified as master, the dummy IP address must align to an IP address of an interface
in the group, VRRP priority is 255 (no configuration needed), the residing router (or L3 Ethernet
switch) interface will be the Master in the Standby cluster. When specified as backup, the virtual IP
address must not be the same as any interface IP address, and a Master must be elected, and the
virtual IP should fall inside the segment of the interface IP addresses.
Example: Setting the backup dummy IP address to 10.1.1.1.
Switch(Config-Router-Vrrp)# virtual-ip 10.1.1.1 backup
21.1.2.3

interface

Commands: interface{IFNAME | Vlan <ID>}
no interface
Function: Configures the VRRP interface
Parameters: interface{IFNAME | Vlan <ID>} stands for the interface name.
Default: Not configured by default.
Command mode: VRRP protocol configuration mode
Usage Guide: This command adds a layer 3 interface to an existing Standby cluster. The "no
interface" command removes the L3 interface from the specified Standby cluster.
Example: Configuring the interface as "interface vlan 1"
Switch(Config-Router-Vrrp)# interface vlan 1
21.1.2.4

enable

Commands: enable
Function: Activates VRRP
Parameters: N/A.
Default: Not configured by default.
Command mode: VRRP protocol configuration mode
Usage Guide: Activates the appropriate Virtual Router. Only a router (or L3 Ethernet switch)
interface started by this enable command is part of Standby cluster. VRRP virtual IP and interface
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
537