Accton Technology ES4710BD User Manual page 536

2) Configure VRRP priority
3) Configure VRRP Timer intervals
4) Configure VRRP interface monitor
1. Create/Remove the Virtual Router
Command
Global Mode
[no] router vrrp <vrid>
2. Configure VRRP Dummy IP Address and Interface
Command
VRRP protocol configuration mode
virtual-ip <ip> {master| backup}
no virtual-ip
interface{IFNAME | Vlan <ID>}
no interface
3. Activate/Deactivate Virtual Router
Command
VRRP protocol configuration mode
enable
disable
4. Configure VRRP Authentication
Command
Interface Mode
ip vrrp authentication mode text
no ip vrrp authentication mode
ip vrrp authentication string <string>
no ip vrrp authentication string
5. Configure VRRP Sub-parameters
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
Explanation
Creates/Removes the Virtual Router
Explanation
Configures VRRP Dummy IP address; the
"no virtual-ip" command removes the virtual
IP address.
Configures VRRP interface, the "no interface"
command removes the interface
Explanation
Activates the Virtual Router
Deactivates the Virtual Router
Explanation
Configures the authentication mode for VRRP
packets sending on the interface, the "no ip
vrrp authentication mode" command resets
the authentication mode to default value.
Configures the simple authentication strings
for VRRP packets sending on the interface,
the "no ip vrrp authentication string"
command removes the authentication string.
535