Table of Contents
Advertisement
8.6.2.3 MAC binding attribution configuration
Click "MAC address table configuration", "MAC address binding configuration", "MAC binding
attribution configuration" to enable port security configuration management lists to set up port
security types.
8.6.2.3.1 Maximum port security IP number configuration
Click "MAC address table configuration", "MAC address binding configuration", "MAC binding
attribution configuration", "Maximum port security IP number configuration" to set up the
maximum port security MAC address numbers. Equals to CLI command 8.5.1.2.2.7.
Port: Specifies the port
Max security MAC number (1-128): Maximum port security MAC address number.
Select Ethernet port 1/1 and set up Max security MAC number as 30,nd click Apply button to apply
this setting to the switch.
8.6.2.3.2 Port violation mode
Click "MAC address table configuration", "MAC address binding configuration", MAC binding
attribution configuration, Port violation mode to set up port security violation mode. Equals to CLI
command 8.5.1.2.2.8.
Port: Specify port
Violation mode: Port violation mode and is divided into Protect and shutdown modes.
Select Ethernet port 1/1 , select violation mode as protect and click Apply button and apply this
setting to the switch.
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
200
Advertisement
Table of Contents
Troubleshooting
