Dvmrp Configuration Commands - Accton Technology ES4626 Management Manual

ip dvmrp
<time_val>
no ip dvmrp report-interval
d. Configuring DVMRP route timeout time
Command
Global Mode
ip dvmrp route-timeout
<time_val>
no ip dvmrp route-timeout
4. Configure DVMRP tunneling
Command
Interface Mode
ip dvmrp tunnel
[metric <metric_val>]
no ip dvmrp tunnel <A.B.C.D>
5. Disable DVMRP
Command
Interface Mode
no ip dvmrp enable

16.5.2.2 DVMRP Configuration Commands

ip dvmrp cisco-compatible
ip dvmrp
ip dvmrp graft-interval
ip dvmrp metric
ip dvmrp nbr-timeout
ip dvmrp probe-interval
ip dvmrp report-interval
ip dvmrp route-timeout
ip dvmrp tunnel
show ip dvmrp mroute
show ip dvmrp neighbor
show ip dvmrp route
show ip dvmrp tunnel
debug ip dvmrp detail
debug ip dvmrp pruning
Set the interval for sending DVMRP report
report-interval
messages; the "no ip dvmrp report interval"
command restores the default setting.
Explanation
Set timeout interval for DVMRP routes; the
"no ip dvmrp route-timeout" command
restores the default setting.
Explanation
Configure tunneling to neighbor A, B, C, D; the
<A.B.C.D>
"no ip dvmrp tunnel" command removes the
tunnel to neighbor A, B, C, D.
Explanation
Disable DVMRP
475