Snmp Configuration Commands; Rmon; Snmp-Server Community - Accton Technology ES4710BD User Manual

4. Configuring TRAP
Command
snmp-server enable traps
no snmp-server enable traps
snmp-server host
<community-string>
no snmp-server host <host-addr>
5. Enable/Disable RMON
Command
rmon enable
no rmon enable
5.4.4.2

SNMP Configuration Commands

5.4.4.2.1 rmon

Command: rmon enable
no rmon enable
Function: Enables the RMON function in the switch: the "no rmon enable" command disables the
RMON function.
Command mode: Global Mode
Default: RMON is enabled by default.
Example:
Enabling RMON.
Switch(Config)#rmon enable
Disabling RMON.
Switch(Config)#no rmon enable

5.4.4.2.2 snmp-server community

Command: snmp-server community {ro|rw} <string>
no snmp-server community <string>
Function: Configures the community string for the switch: the "no snmp-server community
<string>" command deletes the configured community string.
Command mode: Global Mode
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
configured secure address.
Explanation
Sets the switch to enable to send Trap
messages; the "no snmp-server enable traps"
command disables Trap messages.
<host-addr> Sets the IP address and Trap community string
of the NMS to receive SNMP trap messages;
the "no snmp-server host <host-addr>"
command deletes the IP address of the NMS to
receive SNMP Trap messages.
Explanation
Enables/Disables RMON
114