Em4710Bd-Agent; Front Panel; Front Panel - Indicator - Accton Technology ES4710BD User Manual

12 fiber Gb ports line card (EM4700BD-12GX-SFP): supporting 12 SFP Gb fiber ports
for layer 2 and layer 3 switching and routing.
Dual 10Gb fiber line card (EM4700BD-2XG-XENPAK): supporting 2 10GBase-X fiber port
(XENPAK) for layer 2 and layer 3 switching and routing.
Enhanced processing card (EM-7600-ES): enabling enhanced services including IPv6,
MPLS and firewall.
Enhanced processing card with dual fiber Gb ports (EM-7600-ES-2GB): enabling
enhanced services including IPv6, MPLS and firewall with 2 SFP 1000 Mb fiber ports.

1.4.2.1 EM4710BD-AGENT

The EM4710BD-AGENT is switching module for the ES4710BD. System status control, switch
management, user access control and administration, and network maintenances are performed here.
The board can be inserted into M1 or M2 slots of the chassis for Master-Slave redundancy.

1.4.2.1.1 Front Panel

The EM4710BD-AGENT comes with 1 Console port (control console) and 1 10/100Base-Tx
Ethernet port (administration port).
The Front Panel view is shown below:

1.4.2.1.2 Front Panel - Indicator

The following table describes the front panel indicators of EM4710BD-AGENT:
Table 1.1 EM4710BD-AGENT indicators description
LED Panel Symbol
Power
PWR
Indicator
Operation
RUN
indicator
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
Fig 1-3 EM4710BD-AGENT Front Panel view
Status
On (Green)
Off
On (Green, blink at 1 Hz)
On (Green, blink at 8 Hz)
On (Yellow, blink at 8 Hz)
On (Red, blink at 8 Hz)
39
Description
Card powered
Card powered off
Cards operating normally
System is loading (Booting after
cards hot swapping)
System is shutting down (Shutting
Down after SWAP button pressed)
Cards malfunction