1) Configure a switch as the candidate BSR.
Command
Interface Mode
ip pim bsr-candidate <ifname>
[hashlength] [Priority]
no ip pim bsr-candidate
2)
Command
Interface Mode
ip
pim
rp-candidate
[group-list
access-list]
interval]
no ip pim rp-candidate [<ifname>]
3. Disable PIM-SM protocol
Command
Interface Mode
no ip pim sparse-mode
19.4.2.2 PIM-SM Configuration Commands
ip pim sparse-mode
ip pim bsr-border
ip pim query-interval
ip pim bsr-candidate
ip pim rp-candidate
show ip pim bsr-router
show ip pim interface
show ip pim mroute sm
show ip pim neighbor
show ip pim rp
debug ip pim
debug ip pim bsr
19.4.2.2.1
ip pim sparse-mode
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
Explanation
This command is a global candidate BSR
configuration command. It is used to configure
information for PIM-SM candidate BSR and to
contend for the BSR router with the other
candidate BSRs; the "no ip pim bsr-candidate"
command cancels the BSR configuration.
Configure a switch as the candidate RP.
Explanation
This command is a global candidate RP
<ifname>
configuration command. It is used to configure
[interval
information for PIM-SM candidate RP and to
contend for the RP router with the other candidate
RPs; the "no ip pim rp-candidate [<ifname>]"
command cancels the RP configuration.
Explanation
Disables PIM-SM protocol
470