Ospf Troubleshooting Help; Monitor And Debugging Commands - Accton Technology ES4710BD User Manual

Switch4(Config-If-Vlan1)# ip address 10.1.6.1 255.255.255.0
Switch4(Config-If-Vlan1)#ip ospf enable area 0
!Configure MD5 key authentication.
Switch4(Config-If-Vlan1)#ip ospf authentication md5 DCS
Switch4(Config-If-Vlan1)exit
Switch4(Config)#exit
Switch4#

18.4.4 OSPF Troubleshooting Help

1. Monitor and Debugging Commands

2. OSPF Troubleshooting Help
18.4.4.1 Monitor and Debugging Commands
Command
Admin Mode
Show interface
Show ip ospf
Show ip route
Show ip ospf ase
Show ip ospf cumulative
Show ip ospf database
Show ip ospf interface
Show ip ospf neighbor
Show ip ospf routing
Show ip ospf virtual-links
Show ip protocols
[no] debug ip ospf event
[no] debug ip ospf lsa
[no] debug ip ospf packet
[no] debug ip ospf spf
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
Explanation
Displays interface information to verify the interface
and datalink layer protocols are up.
Displays the current running status and configuration
information for
configurations are
troubleshooting according to the output.
Displays route table information, OSPF routing
information can be checked.
Displays exterior OSPF routing information
Displays OSPF statistics
Displays OSPF link-state database information
Displays OSPF information for the specified interface
Displays OSPF neighbor information
Displays OSPF route table information
Displays OSPF virtual link information
Displays information for running routing protocols
Displays all event information for OSPF debug; the
"no debug ip ospf event" command disables this
debug function
Displays information for link-state advertisements; the
"no debug ip ospf lsa" command disables this debug
function
Displays information for OSPF packets; the "no
debug ip ospf packet" command disables this debug
function
Displays SPF information for debug; the "no debug ip
ospf spf" command disables the debugging function.
436
OSPF. Users can
correct and perform OSPF
decide if