Accton Technology ES4710BD User Manual page 461

Function: Displays the IP multicast packet forwarding entries.
Parameters: [group_address] specifies the group address for the forwarding entry to be displayed;
[source_address] specifies the source address for the forwarding entry to be displayed
Default: No display by default.
Command mode: Admin Mode
Usage Guide: This command is used to display IP multicast forwarding entries, or the forwarding
entries in the system FIB table for forwarding multicast packets.
Example: Displaying all IP multicast forwarding entries.
Switch # show ip mroute
Name: Loopback, Index: 2001, State:9 localaddr: 127.0.0.1, remote: 127.0.0.1
Name: Vlan1, Index: 2005, State:13 localaddr: 1.1.1.1, remote: 1.1.1.1
Name: Vlan4, Index: 2006, State:13 localaddr: 2.1.1.1, remote: 2.1.1.1
Name: Vlan3, Index: 2007, State:13 localaddr: 3.1.1.1, remote: 3.1.1.1
Group Origin
225.1.1.101 1.1.1.100
239.255.0.1 9.1.1.100
239.255.0.1 7.1.1.100
239.255.0.1 1.1.1.100
Switch #
Displayed information
Name
Index
Group
Origin
Iif
Wrong
Oif:TTL
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
Iif
Vlan1
Vlan4
Vlan4
Vlan1
Explanation
The interface list used by the multicast protocol and basic information
for the interfaces
Index number for the interface
Multicast forwarding entry group address
Multicast forwarding entry source address
Multicast forwarding entry ingress interface
The number of multicast packets (to this forwarding entry) from wrong
incoming interfaces
Oif stands for the outgoing interface list, this list can be referred to by
the index number according to the information list above; TTL is the
threshold value for that outgoing interface.
460
Wrong Oif:TTL
0 2006:1
2007:1
0 2005:1
0 2005:1
0 2006:1
2007:1