Dhcp Network Parameter Configuration - Accton Technology ES4710BD User Manual

configuration" to configure the DHCP client boot file name and client server address which is for
save the boot file:
DHCP pool name - Choose one DHCP address pool
DHCP client bootfile name (1-128 characters) - boot file name. Same as CLI command
14.2.2.1
File server - server address where the client boot file is saved. Same as CLI command
14.2.2.17
Example: Choose DHCP pool name as 1, configure the DHCP client bootfile name as
c:\temp\nos.img, configure File server1 as 10.1.128.4, and then, click the Apply button to apply this
configuration to switch.

14.6.2.6 DHCP network parameter configuration

Click "DHCP configuration", "DHCP server configuration", "DHCP network parameter
configuration" to specify network parameters. Same as CLI command 14.2.2.18:
DHCP pool name - Choose one DHCP address pool
Code (0-254) - network parameter code
Network parameter value type – configures network parameter type. Ascii is an ASCII string
with maximum of 255 characters; hex is hex number with maximum of 510. Length must be
an even number. ip address is IP address
Network parameter value – parameter value
Operation type – configures or cancels network parameter
Example: Choose DHCP pool name as 1, configure Code as 72, choose Network parameter value
type as IP address, configure Network parameter value as 10.1.128.240, choose Operation type as
Set network parameter, and then click the Apply button to apply this configuration to switch.
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
321