Configuring Web Server - Accton Technology ES4710BD User Manual

enable Telnet service. The Telnet server configuration menu will then appear.
Select "2" in the Telnet server configuration menu to return to the Setup main menu.

3.1.2.4 Configuring Web Server

Select "3" in the Setup main menu and press Enter to start configuration of the Web server:
Configure web server
[0]: Add web user
[1]: Config web server status
[2]: Exit
Selection number:
The corresponding prompt in Chinese is:
配置 Web 服 器
[0]: 添加 Web 服 器用
[1]: 配置 Web 服 器的状
[2]: 返回上一 菜
序号:
Select "0" in the Web server configuration menu and press Enter, the following screen will appear:
Please input the new web user name:
The corresponding prompt in Chinese is:
入要添加的 Web 用 名:
Note: valid username length is 1 to 16 characters. When a valid username is entered, press Enter to
bring up the following prompt:
Please input the new web user password:
The corresponding prompt in Chinese is:
入用 密 :
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
74