Port Mac Configuration; Port Status List - Accton Technology ES4710BD User Manual

Authentication mode – Configures the access control method for a specific port. Mac-based is
access control method which is based on MAC address; port-based access control method
which is based on port. Same as CLI command 20.2.2.10.
Port maximum user(1-254) - Configures the permission maximum user for specific port. Same
as CLI command 20.2.2.8.
Example: Choose Ethernet port1/1, choose 802.1x status as Open, choose Authentication type as
auto, choose Authentication mode as port based, configure Port maximum user as 10 and then click
the Set button to apply this configuration to switch.
20.5.2.3 802.1X port mac configuration
Click "Authentication configuration", "802.1X configuration", "802.1x port mac configuration" to
Add a MAC address table to dot1x address filter. Equivalent to CLI command 20.2.2.3.
Port – If specify port, the added list only suitable for specific port, specify All Ports, the added
list suitable for all port.
Mac – adds MAC address
Operation type – adds, removes filter MAC
Example: Choose Ethernet port 1/1, configure MAC as 00-11-11-11-11-11, choose Operation type
as Add mac filter entry, and then click the Apply button to apply this configuration to switch.
20.5.2.4 802.1X port status list
Click "Authentication configuration", "802.1X configuration", "802.1x port status list" to display
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
532