Monitor And Debug Commands; Show Vrrp; Debug Vrrp - Accton Technology ES4710BD User Manual

21.3.1 Monitor and Debug Commands

21.3.1.1 show vrrp

Commands: show vrrp [<vrid>]
Function: Displays status and configuration information for the VRRP standby cluster.
Command mode: All Modes
Example:
Switch# show vrrp
VrId <1>
State is Initialize
Virtual IP is 10.1.20.10 (Not IP owner)
Interface is Vlan2
Priority is 100
Advertisement interval is 1 sec
Preempt mode is TRUE
VrId <10>
State is Initialize
Virtual IP is 10.1.10.1 (IP owner)
Interface is Vlan1
Configured priority is 255, Current priority is 255
Advertisement interval is 1 sec
Preempt mode is TRUE
Circuit failover interface Vlan1, Priority Delta 10, Status UP
Displayed information
State
Virtual IP
Interface
priority
Advertisement interval
Preempt
Circuit failover interface

21.3.1.2 debug vrrp

Commands: debug vrrp [ all | event | packet [recv| send] ]
no debug vrrp [ all | event | packet [recv| send] ]
Function: Displays information for VRRP standby cluster status and packet transmission; the "no
debug vrrp" command disables the debug information.
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
Explanation
Status
Dummy IP address
Interface Name
Priority
Timer interval
Preemptive mode
Interface Monitor information
542