Table of Contents
Advertisement
10.5.2.5 Link type configuration
Click "MSTP control" to enter MSTP port operation, then "Link_Type Config".
Set the link type of the current port.
Set the link of port 1/7 to be forced point-to-point type.
10.5.2.6 MSTP port configuration
Click "MSTP control" to enter MSTP port operation, then "MSTP Agreement Port Config".
Run the command to enable MSTP under the switch port configuration mode.
Enable MSTP under Global Mode and disable MSTP for port 1/2.
10.5.3 MSTP global control
10.5.3.1 MSTP global protocol port configuration
Click "MSTP control" to enter MSTP Global control, then "MSTP Global Agreement Port Config".
Run MSTP enable command under the switch port configuration mode.
Enable MSTP in Global mode.
10.5.3.2 Forward delay time configuration
Click "MSTP control" to enter MSTP Global control, then "Forward-time Config".
Set the value for switch forward delay time
Set MSTP forward delay time to 20 seconds in Global Mode.
10.5.3.3 Hello_time configuration
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
248
Advertisement
Table of Contents
Troubleshooting
