Front Panel - Console Port; Front Panel - Management Port - Accton Technology ES4710BD User Manual

Master-Slave
indicator
Power
Supply
Module
Status
indicator:
POWER
Fan
Assembly
Status
indicator:
FAN
1.4.2.1.3 Front Panel – Console Port
The EM4710BD-AGENT provides a RJ-45 (receptacle) Console serial port. Users can connect to
hosts via this port to perform system debugging, configuration, maintenance, administration and
host software loading.
Property
Connector
Connector type
Baud rate
Supporting service
1.4.2.1.4 Front Panel – Management Port
The EM4710BD-AGENT provides a RJ-45 (receptacle) Ethernet port. Users can connect through
this administration port to hosts for program loading or to connect to remote devices for remote
administration (e.g., an administrative workstation). Note: when connecting to the host, a cross-over
cable should be used.
Table 1.3 EM4710BD-AGENT administrative port description
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
Off
On (Green)
M/S
Off
On (Green)
OK
Off
On (Yellow)
Fail
Off
On (Green)
OK
Off
On (Yellow)
Alarm
Off
Table 1.2 EM4710BD-AGENT Console description
RJ-45 (receptacle)
RS-232
9600bps (default)
Connects to character terminals
Connects to PC serial port and running terminal emulator on
PC.
Cards are powered off and can be
removed
Master
Slave
Power Supply Module operating
normally
Power supply module malfunctioning
or not present (with Fail off)
Power Supply Module malfunction
Power
normally or not present (with OK off)
Fan operating normally
Fan malfunctioning or not present
(with Alarm off)
Fan malfunction
Fan operating normally or not present
(with OK off)
Specification
40
supply module operating