Accton Technology ES4710BD User Manual page 511

Command
Global Mode
aaa enable
no aaa enable
aaa-accounting enable
no aaa-accounting enable
dot1x enable
no dot1x enable
dot1x privateclient enable
no dot1x privateclient enable
2. Access management unit property configuration
1) Configure port authentication status
Command
Port Mode
dot1x port-control
{auto|force-authorized|force-u
nauthorized }
no dot1x port-control
2) Configure port access management method
Command
Port Mode
dot1x port-method {macbased
| portbased}
no dot1x port-method
dot1x max-user <number>
no dot1x max-user
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
Explanation
Enables the AAA authentication function in the switch; the
"no aaa enable" command disables the AAA authentication
function.
Enables the accounting function in the switch; the "no
aaa-accounting enable" command disables the accounting
function
Enables the 802.1x function in the switch and ports; the "no
dot1x enable" command disables the 802.1x function.
Enables the switch to force client software to use
Edge-Core's proprietary 802.1x authentication packet format;
the "no dot1x privateclient enable" command disables the
function and allow the client software to use standard 802.1x
authentication packet format.
Explanation
Sets the 802.1x authentication mode; the "no dot1x
port-control" command restores the default setting.
Explanation
Sets the port access management method; the "no dot1x
port-method" command
management.
Sets the maximum number of access users for the specified
port; the "no dot1x max-user" command restores the default
setting of allowing 1 user.
510
restores MAC-based access