Et her net 1/ 2
vl an1
The followings are the configurations of SwitchA and SwitchB.
(1) Configuration of SwitchA:
Switch (Config)#interface vlan 1
Switch(Config-If-Vlan1)# ip pim dense-mode
Switch(Config-If-Vlan1)#exit
Switch (Config)#interface vlan2
Switch(Config-If-Vlan1)# ip pim dense-mode
(2) Configuration of SwitchB:
Switch (Config)#interface vlan 1
Switch(Config-If-Vlan1)# ip pim dense-mode
Switch(Config-If-Vlan1)#exit
Switch (Config)#interface vlan 2
Switch(Config-If-Vlan1)# ip pim dense-mode
19.3.4 PIM-DM Troubleshooting Help
1. Monitor and Debug Commands
2. PIM-DM Troubleshooting Help
19.3.4.1 Monitor and Debug Commands
Command
Admin Mode
show ip pim mroute dm
show ip pim neighbor
show ip pim interface
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
SWITCHA
Et her net 1/ 1
vl an2
Fig 19-1 Typical PIM-DM environment
Explanation
Displays the PIM-DM packet forwarding entry
Displays PIM-DM neighbor information
Displays PIM-DM interface information
SWITCHB
Et her net 1/ 1
Et her net 1/ 2
vl an1
464
vl an2